Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Model Years
- Show Fewer Model Years
Parts & Accessories
$3.99
Replacement hardware for the Range Boost system.
- Socket head fasteners
- Loctite pre-applied
$4.99
Keep your computer and sensors ready for every ride with replacement batteries.
Genuine replacement parts.
- Don't let a dead battery spoil your ride.
- Keep your computer fresh and ready to go with a new battery.
- For use with the Bontrager Micro Remote
- Sold individually
$5.50
The adapter puck is required for mounting Wahoo head units to the Pro Blendr Alloy Computer Mount.
- Start with a Blendr stem, add the appropriate base, and finish with Pro Blendr Alloy Computer Mount and Wahoo Adapter Puck for secure mounting of your Wahoo head unit.
Blendr is an elegant, integrated accessory mounting solution
- For use with Wahoo head units and Pro Blendr Alloy Computer Mount
- Removable design alloys quick and easy adapter puck replacement
$5.99
The MSW Computer Spoke Magnet is designed to fit round and bladed spokes of various diameters.
- Tool-free installation
- Alloy construction
- Fits round and bladed spokes
$6.99
Genuine Bontrager cycling computer mounting accessories and replacement parts.
- Ensure your computer stays properly in place.
Replacement adapter for the Insta-Mount system
- Universal mount permanently attaches to the back of your phone or other device
- Use with Bontrager Trip mount for seamless Blendr capability
$7.99
Get your computer dialed with the perfect magnet
Getting the correctly sized magnets means you're worrying about where the next coffee stop is, not if your computer is recording the ride.
- Universal crank magnets sized for your bike and sensor
- Compatible with all cadence sensors
$7.99
Getting the correctly sized magnets means you're worrying about where the next coffee stop is, not if your computer is recording the ride.
Key features:
- Universal crank magnets work with any cadence sensor
- Get the perfectly sized magnet, sized right for your bike and sensor
- 20mm cadence magnet improves signal for wider gaps between crank and sensor
$7.99
The adapter puck is required for mounting Garmin head units to the Pro Blendr Alloy Computer Mount.
- Start with a Blendr stem, add the appropriate base, and finish with Pro Blendr Alloy Computer Mount and Garmin Adapter Puck for secure mounting of your Garmin head unit.
Blendr is an elegant, integrated accessory mounting solution
- For use with Garmin head units and Pro Blendr Alloy Computer Mount
- Removable design alloys quick and easy adapter puck replacement
- Attach your Garmin tether for an additional layer of security
$8.50
Get your computer dialed with the perfect magnet
Getting the correctly sized magnets means you're worrying about where the next coffee stop is, not if your computer is recording the ride.
- Universal crank magnets sized for your bike and sensor
- Compatible with all cadence sensors
$9.99
Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Trip Computer Mount for a clean, flush look that securely holds your Bontrager Trip computer in a perfect position to see on the go.
Key features:
- Blendr is an elegant, integrated accessory mounting solution
- Provides clean and secure mount for Bontrager Insta-Mount or Trip Computer
- Works with any Blendr-compatible stem and the accompanying base
- For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)
$9.99
Worried about losing the fastest bike computer on the market? Our ELEMNT BOLT and ROAM specific tether screws into the back of your ELEMNT BOLT or ROAM and allows you bike computer to still fit on its patent-pending integrated out front mount for optimum aerodynamic performance.
- Includes tether and attachment screw
$13.00
Profile Design's UCM XL Universal Computer Mount provides a convenient 60mm-long place to mount your computer on your aero bars. It installs without tools, stays put and can be positioned as needed for easily viewing and controlling your computer.
$14.99
Blendr add-on to Kovee Pro 35 stems
Clean up your Bontrager Kovee Pro 35 stem cockpit with Blendr Pro bases.
- Blendr works with this simple formula: Stem + Base + Mount. Add accessory
- Bases for use with the Kovee Pro 35mm stem
- Add any accessory mount (sold separately) for an elegant, integrated look
$14.99
Our aerobar/TT mount for Wahoo ELEMNT GPS bike computers is made of lightweight, durable plastic and is the ideal viewing position during your triathlon or time trial.
- Fits 22.2mm aero bar extensions
- Weight: 0.3oz
- Works with ELEMNT, ELEMNT BOLT, and ELEMNT MINI
(Note: BOLT loses aerodynamic advantage with this mount)
$14.99
With this adaptor piece, you are able to easily convert any Garmin quarter turn bike computer mount to a Wahoo bike computer mount.
$17.00
- Use to keep Blips in place on handlebars
- Fits 31.8mm round portion of drop bar
- Clamp mounts directly to bar outside of tape zone
- Ideal for use with thumbs or index fingers while hands are on the tops
- Right and left specific, just like Blips
- Weight: 12 grams (for pair)
- Material: Polypropylene
- Compatibility: 11-speed
- Recommended Group: SRAM RED eTap
$18.98
$39.99
53% Off
BLE USB Adapter gives Rouvy virtual training software the ability to seamlessly connect to Bluetooth devices and sensors. The adapter contains a Bluetooth (BLE) radio that allows PCs to communicate with BLE devices, including Saris smart indoor bicycle trainers and power meters.
Most importantly, the BLE USB Adapter is necessary to update the firmware Over the Air (OTA) via VirtualTraining for the Hammer and Magnus bike trainers.
- Bluetooth adapter for PCs to work with Rouvy
- Needed for Over the Air Firmware Updates to Smart Indoor Bike Trainers.
- Works with PC desktops and laptops.
$19.99
Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Garmin High Mount for a clean, flush look that securely holds your Garmin centered over the stem.
Key features:
- Blendr is an elegant, integrated accessory mounting solution
- Provides clean and secure mount for Garmin GPS
- Works with any Blendr-compatible stem and the accompanying base
- For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)
$19.99
Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Garmin Low Mount to add a Garmin GPS directly to the Blendr stem mount.
Key features:
- Blendr is an elegant, integrated accessory mounting solution
- Provides clean and secure mount for Garmin GPS
- Works with any Blendr-compatible stem and the accompanying base
- For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)
$19.99
Blendr is the ultimate system for clean and easy integrated installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr GoPro Mount for a clean, flush look that securely holds your GoPro in a centered location.
Key features:
- Blendr is an elegant, integrated accessory mounting solution
- Provides clean and secure mount for GoPro camera
- Works with any Blendr-compatible stem and the accompanying base
- For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)
$19.99
Allows use of one Blendr mount on a Trek Madone SLR
Blendr add-on to the Madone SLR bar/stem
Mount light, computer, GPS and/or cameras to your top-of-the-line aero road bike
- Blendr works with this simple formula: Stem + Base + Mount. Add accessory.
- Bases for use with the Trek Madone SLR Aero Integrated handlebar
- Add any accessory mount (sold separately) for an elegant, integrated look
$20.99
Easily mount a cell phone and case directly to your bars for safe convenient access with the Insta-Mount and keep all of your favorite cycling and fitness apps safely accessible.
• Mount your hard-shell smart phone case to your bike
• Allows for easy access of phone on stem or handlebar
• Includes Insta-Mount, universal mount, and application grid
• Blendr-compatible
$22.99
Convert your K-Edge Garmin Computer Mount to be a Computer + Action Camera combination mount. Works with any camera that utilizes the GoPro sytle interface, including GoPro Hero, Garmin VIRB, and Shimano CM-1000.
- Camera Adapter mount with GoPro style interface
- Fits K-EDGE Garmin Mounts (K13-500, K13-505, K13-560)
- Locks GoPro, Shimano, VIRB style cameras underneath Garmin Computer.
- Centers camera in out of site position
- Improves video clarity by removing plastic mount shake
- Colors: Anodized Black
- Weight: 14grams
*Note: Garmin VIRB requires the GoPro adapter that is included in the box with the VIRB.
$29.99
The K-EDGE Gravity Cap is a great computer mount option for those riders that already a lot going on with the cockpit of their bikes, or just want a simple and sleek computer mount. The Gravity Cap replaces your existing top cap and is ideal for Downhill, Enduro, Gravel, Touring, etc.
- CNC Machined 6061-T6 Aluminum
- Injection Molded Copolymer Interface
- Compatibility: Wahoo ELEMNT
- Lifetime Warranty
- Weight: 18g
- Anodized Colors: Black
$31.99
Pro Blendr is the ultimate computer integration system for clean and easy installation, made from durable alloy.
- Start with a Blendr stem, add the appropriate base, and finish with Pro Blendr Alloy Computer Mount for secure mounting of computers. Don't forget your Garmin or Wahoo Adapter Puck! Those are sold separately so you can build the ultimate Blendr system that's right for you.
- Alloy design provides clean and secure mounting of computers
- Adapter pucks available for Wahoo and Garmin computers (sold separately)
- Compatible with all Blendr bases
- Attach your Garmin tether for an additional layer of security
$34.99
Key features:
- Replacement strap for Bontrager Heart Rate Belt
- Perfect option when the strap loses stretchiness or gets funky
- Not compatible with other heart rate monitors
$34.99
K-EDGE’s legendary CNC machined aluminum quality and strength for the price conscious cyclist. Pro positioning of your computer, out-front and flush with the top of the handlebar.
- CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface
- Compatible: Garmin EDGE 820, 520, 510, 500, 25 and 20.
- Replaceable Garmin Insert with K-EDGE “Definitive Click” locking system
- Fits 31.8MM Handlebars
- NOT combo compatible
- Weight: 48g
- Anodized Color- Black
$39.99
Be ready for any terrain with this Garmin Edge mountain bike mount designed specifically for bikes with short stems. It’s ideal for off-road riding when you may not want your Edge bike computer mounted in front of your handlebar.
$39.99
Stay ahead of the pack with Garmin's Out-front Bike Mount that lets you to take full advantage of your Edge's capabilities without compromising your ride. The mount positions your device for easier monitoring and safety. Also compatible with the Forerunner 910XT and 310XT when used with a quick-release kit (sold separately).
$39.99
The Wahoo RPM cadence sensor is your sleek little solution for measuring cycling cadence data. It is wireless, magnet-less, lightweight, and easily mounts to your bike's crank arm or to your shoe. Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and GPS bike computers. Collecting cadence data has never been this easy.
- Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers.
- No tangled wires on your bike to connect the sensor to your device.
- It only weighs 7 grams!
- Provides accurate cadence data during your ride
- (1) mount with double sided 3M tape, or (2) use the silicone sleeve and mount with zip ties.
- The RPM can be worn on your shoe for spin classes or use with multiple bikes
- Two LED lights show the sensor's device connection (blue) and cadence detection (red)
- No charging required! Operates on a coin cell battery for up to 1 years.
- RPM cadence sensor will fit with most bikes and frame sizes
$39.99
The Wahoo RPM speed sensor is the sleek, magnet-less solution for capturing cycling speed data. It easily mounts to your bike's front wheel hub, and the Bluetooth Smart and ANT+ dual band technology allow you to connect to and display data on both smartphones and bike computers. Tracking speed data has never been this easy.
- Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers.
- No tangled wires on your bike to connect the sensor to your device.
- The RPM speed installs easily with no magnets required
- It only weighs 16.5 grams with the mount included
- Provides accurate speed data during your ride
- Mounts on most front wheel hub with a secure silicone casing
- Two LED lights show the sensor's device connection (blue) and speed detection (red)
- No charging required! Operates on a coin cell battery for up to 1 years.
- RPM Speed will fit with most bikes and frame sizes
$40.00
Monitor your speed as you ride with this easy-to-install wireless sensor. With no magnets or other exposed parts to line up, this sensor is easy to install, maintain and move between bikes.
The speed sensor 2 attaches to the hub of either wheel. You can set up wheel size in our Garmin Connect online community or self-calibrate with an Edge cycling computer or compatible Garmin device. Once set up, you’ll get accurate speed and distance at all times — even without a head unit.
ANT+ connectivity and BLUETOOTH Low Energy technology let you sync to Garmin Connect and other training apps, compatible devices and fitness equipment for better data when you ride indoors and outdoors.
$40.00
Monitor your pedaling cadence as you ride with this easy-to-install wireless sensor. With no magnets or other exposed parts to line up, this sensor is easy to install, maintain and move between bikes.
Simply attach the sensor and ride. With no magnets or other exposed parts to line up, this sensor is easy to install, maintain and move between bikes.
$44.99
The K-EDGE Garmin Stem Mount is a great upgrade solution for cyclists who prefer their computer above the stem. Mounting off of the steerer tube, the mount replaces a standard 5mm spacer, and is locked securely in place by the top cap compression system.
The adjustable version allows for a variety of different stem angles. Can be used with positive or negative degree stems and additional spacers can be added (5mm to 10mm) above the stem. Note that some of the larger computers will not always work with a steep angled stem.
Designed with mountain biking in mind, the K-EDGE Stem mount is also ideal for much more including: cyclocross; triathlon; bike touring; or if you simply prefer this position for your computer.
$49.00
SRAM eTap batteries are literally a snap to remove and charge. Just flip the tool-free battery latch up and slide the battery up and out of the derailleur. Then snap the battery into the USB powered charger and connect the charger to any USB power source or A/C USB adaptor. A full charge takes just 45 minutes to complete.
- Finish: Black
- Compatibility: SRAM RED eTap
$49.99
A lightweight and highly adjustable mount for positioning any Garmin computer on aero bars. The pivoting two piece design offers multiple mounting positions based on aero bars, hydration systems and rider preference.
- For 22.2mm diameter aero bar extensions
- Compatible with all Garmin EDGE computers
- Highly adjustable for multitude of mounting positions
- Replaceable Garmin Insert with K-EDGE “Definitive Click” locking system
- GoPro Interface Compatible
- Weight: 29g
- Anodized Colors: Black, Red, Blue
- Made in Boise, Idaho, USA
- Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded
$49.99
A simple, lightweight and versatile mount for positioning the Wahoo ELEMNT between the aero bars. Single bolt clamp and pivoting mount design.
- For 22.2mm diameter aero bar extensions
- Compatible with Wahoo ELEMNT, Wahoo Bolt, Wahoo MINI
- Combo Compatible with use of adapter for GoPro style interface action camera and lights
- Replaceable Wahoo insert
- Weight: 29g
- Anodized Colors: Black
- Made in Boise, Idaho, USA
- Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded
$59.99
Superlight, machined aluminum, race mount for the ultimate Tour de France level performance. At 32 Grams the Race Mount is 33% lighter than the “standard” Garmin Mount.
- CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface
- Compatibility: Garmin 820, 520, 510, 500, 25, 20
- Fits Handlebars: 31.8MM
- NOT GoPro Compatible
- Anodized Color: Black, Red, Blue, Red/Blue
- Made in Boise, Idaho, USA
- Lifetime Guarantee against material or manufacturer defects. Damages due to abuse or crashing excluded.
* Attention: ASSEMBLY BOLTS NOT MEANT TO BE REMOVED OR TAMPERED WITH AT ANY TIME.
The torx head bolts are installed using a permanent thread-lock compound. Doing so will void all warranties.
Please contact K-EDGE warranty manager Info@K-EDGE.com for questions or concerns. We highly suggest you follow the recommendations in the Sigma instructions that recommend use of the provided tether leash.
$59.99
SRAM eTap Battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs.
- Up to 1000 kilometers of riding per charge
- Weight: 24g
- Finish: Black
- Compatibility: SRAM RED eTap
$69.99
All you need for cycling data, all together at once! The Wahoo RPM Speed and Cadence sensors are both a sleek, wireless, and magnet-less solution. Each mounts easily to your bike and the Bluetooth Smart and ANT+ duel band technology allows you to connect and display data on both smartphone and bike computers.
- Dimensions (LxWxH): 1.25" x.75" x 1"
- Weight: 7 grams (without mount)
- Battery: CR2032
- Battery Life: Up to 12 months
- Water Rating: IPX7 (waterproof up to 5 ft)
- Wireless Signal Strength: Up to 10 feet
- Note: Speed Sensor is NOT compatible with spin bikes
$70.00
Monitor your speed and cadence as you ride with these easy-to-install wireless sensors. With no magnets or other exposed parts to line up, these sensors are easy to install, maintain and move between bikes.
The speed sensor 2 attaches to the hub of either wheel and self-calibrates with your Edge cycling computer or compatible Garmin device to give you accurate speed and distance at all times — even without a head unit.
The cadence sensor 2 fastens to any size crank arm and measures pedal strokes per minute so you can get the most out of your training.
Send live speed, distance and cadence data to compatible training apps or displays by using ANT+ connectivity and BLUETOOTH Low Energy technology.
With both of these sensors on your bike, you can work to improve your personal best or see where you stand against the pros.
$74.99
Bontrager's DuoTrap Digital Speed/Cadence Sensor pulls double duty for your ANT+ cycling computer. It wirelessly transmits speed and cadence data and fits directly into the chainstay of certain Trek bicycles for a clean look that installs in seconds.
$74.99
Connect ANT+ and Bluetooth Smart devices to all of the data available from the DuoTrap S sensor for your on-the-bike wireless needs.
• ANT+ 2.4 GHz and Bluetooth Smart wireless digital speed and cadence sensor
• ANT+ and Bluetooth Smart allow simultaneous use of Trip 300 and smartphone
• For use with many ANT+ and Bluetooth Smart wireless technology enabled devices
• Includes Bontrager wheel magnet, crank cadence band, and CR2032 battery
• Works with Trek DuoTrap compatible bikes
$74.99
Get more data from your rides with the Bontrager Interchange digital combo speed and cadence sensor. This ANT+ 2.4 Ghz is designed to work with Bontrager Node wireless computers. It also works with many other ANT+ enabled devices. Sensor adjustment is easy with the adjustable arm.
• ANT+ 2.4 Ghz and Bluetooth Smart wireless digital speed and cadence sensor
• ANT+ and Bluetooth Smart allow simultaneous use of Trip 300 and smartphone
• For use with many ANT+ and Bluetooth Smart wireless technology enabled devices
• Independently adjustable arm for precise alignment of speed and cadence sensors
• Includes Bontrager wheel magnet and crank cadence band
• Includes silicone mounting strap to fit most chainstays and CR2032 battery
• Visit www.thisisant.com/directory/ for compatible ANT+ devices
• Visit www.bluetooth.com/pages/bluetooth-smart-devices.aspx for compatible Bluetooth devices
$118.00
Be it the fireworks of a finale, an ideal rhythm, climbing on the top, or a deep, dark place extracting the last kilojoule of effort on your bike split, you want to adjust your gear with the twitch of a finger. eTap Blip satellite shifters allow you to shift when you want, where you want.
- Limitless remote shifting positions for drop and aero bars
- Wired shift buttons can be positioned however the rider prefers
- Connect to Blip Box or drop bar eTap levers
- Compatible with SRAM RED eTap shift/brake controls
$150.00
STAY AWARE OF APPROACHING CARS
This rearview radar pairs with your Edge bike computer or compatible smartphone to alert you of vehicles approaching from behind.
- Reliable rearview radar lets you ride like you know what’s coming.
- One radar. Multiple display options. Pair it with your compatible Garmin device, your phone or both.
- Don’t have an Edge or other compatible device yet? No problem. The Varia app has you covered.
- It’s small, it’s easy to mount, and it works with just about any bike.
- Get more life out of your radar with up to 7 hours of battery life.
MAXIMUM AWARENESS
- Varia RVR315 rearview radar provides visual and audible alerts for vehicles approaching from behind up to 153 yards (140 meters) away.
MULTIPLE PAIRING OPTIONS
- This radar works seamlessly with your Edge bike computer or compatible smartphone as well as select Garmin wearables.
WORKS WITH THE VARIA APP
- This smartphone app helps you increase your awareness by providing graphics — plus tone and vibration alerts — to indicate the position and speed of approaching cars.
THIRD-PARTY APP COMPATIBLE
- When used with a compatible smartphone, Varia radar integrates with your favorite apps, such as Ride with GPS to overlay your maps with rearview radar alerts.
COMPACT DESIGN
- Easily mount this sleek, compact device on the seatpost of almost any road-use bicycle. The vertical design allows for better leg clearance and a perfectly comfortable ride.
BATTERY LIFE
- Time spent charging is not as good as time spent riding. Get up to 7 hours of battery life.
In the box:
- RVR315
- Mounting hardware
- Power cable
- Documentation
$166.99
- Di2 internal battery, fits all e-Tube Di2 groups
- Capacity: 500 mAH (± 2000km)
- Use with EW-WU101 or SC-MT800 interfaces/junction to gain BlueTooth Smart wireless connectivity for on-the-fly adjustments with smartphones and tablets
- Requires SM-BCR2 charger
$199.99
Know what's coming.
Ride with extra confidence with Trek CarBack Radar Rear Light. CarBack's radar helps detect rear-approaching vehicles from up to 240m and provides audio and visual alerts through paired GPS head units for increased on-bike awareness.
Built with integrated best-in-class Daytime Running Lights that are visible from up to 2km away, CarBack is a must-have for every cyclist riding on shared roads.
- CarBack can detect and alert riders of rear-approaching vehicles from up to 240m away
- Compatible with most cycling GPS computers
- Pair CarBack with the Trek Accessory app to see a vehicle's rear-approaching and passing distance on your smartphone
- Designed with focus, flash, and range to be Daytime-visible from up to 2km away
- Four light flash modes: Day Flash 90LM, Day Steady 25LM, Night Steady 5LM, and Night Flash 5 LM
- Visible fuel gauge LEDs make it easy to see CarBack's 7+ hour battery status
- IPX7 waterproof rating to confidently ride through wet conditions
- Includes Quick Connect Plus rear mount and USB-C charging cable
Page 1 of 1