Brakes/Levers/Pads

Avid makes it easy to get a perfectly set up brake with their innovative CPS Hardware Kit. Each kit features a series of washers that make it easy to set up your brake. Step 1: Install the bolts and washers loosely so the caliper can move. Step 2: Squeeze the brake lever. Step 3: Tighten the bolts. It's that simple to get a rub-free setup! This kit includes stainless steel hardware with washers and bolts for both CPS (Caliper Positioning System) mounting and standard (direct-mount)mounting.

The squeeze of our levers is what dreams are made of. Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - ReachAdjustment -- Qwik-Adjust Barrel Adjuster Bend Zone

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

The squeeze of our levers is what dreams are made of (and you know which dreams we're talking about). Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - Reach Adjustment - Qwik-Adjust Barrel Adjuster - Compatible with mechanical disc brakes and linear-pull brakes

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Smooth, controlled braking is yours with Avid's G2 CleanSweep Rotor. It utilizes cross-drilled technology to dissipate heat and cut weight, giving you a consistent feel at the lever and predictable speed control in all conditions.

Need a replacement line for your Avid hydraulic disc brakes? You're covered with Avid's Hydraulic Line Kit. It's got 2000mm of hose for front or rear application, and all the fittings to work with your brakes.

• Designed to keep dust and dirt out of V-Brake cable/housing systems

Shimano compatible road caliper brake pads from Bontrager. Genuine replacement parts Reliable Bontrager stopping power for optimal operation and safety. - Sleek brake pads and cartridges are Shimano compatible - British Standard Compound (BS)—Long wearing pad compound - Exceeds all US standards for brake pads—Sticky rubber for improved braking - Sold in pairs

Keep your linear brakes safe working order with these Bontrager replacement brake pads. Genuine replacement parts Reliable Bontrager stopping power for optimal operation and safety. - British Standard Compound (BS)—Long wearing pad compound - Exceeds all US standards for brake pads—Sticky rubber for improved braking - Sold in pairs

The Bontrager Carbon Stop Cork pad was engineered by Keith Bontrager specifically to work with carbon rims. Designed to dissipate heat on long descents and decrease rim wear, they will keep you coolly in control on even the most challenging mountain stages. Key features: - Engineered especially for use with carbon rims - Designed by Keith Bontrager for professional cyclists - Unique cork compound reduces braking heat and wear on rim

Key features: - Designed for use on carbon rims - Confirm wheel compatibility before use - Use in mud and grit will accelerate rim wear - 520554 is the Shimano style Flash Evo and fits Shimano and SRAM - 520555 is the Campagnolo style Race Pro

Add another braking option to your road or cross bars with Cane Creek's Cross Top Brake Levers. They are a great way to gain more control on technical cyclocross courses by enabling braking from the tops of the bars.

- Pad sets include pads and retraction spring for one caliper

Compatible with cantilever brakes, Jagwire's Mountain Sport Brake Pads boast Jagwire's tried-and-true all-weather compound for excellent speed control, stopping power and durability.

Jagwire Sport Organic pads feature an all-new resin compound. Mounted on a steel backing plate, this compound gives good power and modulation, while keeping noise to a minimum. Great for riders primarily riding in dry conditions.

Jagwire's Mountain Pro Brake Pads are a nice upgrade for your linear-pull and cantilever brakes. They feature cartridge-style pads that are easily replaced when the time comes. And the pads are made of Jagwire's tried-and-true all-weather compound for excellent stopping and durability.

Jagwire's Mountain Sport Disc Brake Pads (Formula) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent braking performance and durability.

Jagwire's Mountain Sport Disc Brake Pads (Shimano) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent braking performance and durability.

Jagwire's Mountain Sport Disc Brake Pads (Hayes) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent braking performance and durability.

These disc brake pads fit a variety of SRAM and Avid brakes and offer industry leading brake compounds for consistent, confident performance. - Low noise, high performance semi-metallic compound lasts longer than resin - Steel backing plate

Pro Extreme Sintered pads feature an aggressive compound that provides maximum stopping power making it perfect for DH riding. The dense, sintered compound also resists water making it extremely effective in wet conditions. - Compatible with Shimano R9170, Metrea U5000, Ultegra R8070, and Road RS305, RS405, RS505 and RS805 - Compatible with Rever MCX1 Flat-Mount and MCX2 Flat-Mount

Jagwire's Road Pro Brake Pads fit Campagnolo, Shimano and SRAM sidepull brakes. They feature Jagwire's tried-and-true Pro Series compound for excellent braking and durability. The pads are cartridge-style for easy pad replacement without losing your brake shoe position. And there are wheel guides on the shoes to help when you're putting a wheel back on.

Replacement inserts for Shimano cartridge v-brake pads - Black: standard compound designed for dry condition riding - Red: semi-aggressive compound for good performance - Salmon: aggressive compound for extreme weather conditions - Green: designed for ceramic coated rims - Dual: combination of Salmon and Black compounds for more controlled, smoother stopping

The Eagle 2 is a revolutionary pad that first utilized the hardened reinforced steel internal backbone. This larger pad has been used in all areas of cycling and is a good choice when frame, wheel and fork design allow. Features: - Hardened and Plated reinforced steel backbone - Patented Angled tip plow - Water grooves - Pad-Lock washer system - Available in Threaded and 2024 Aluminum Smooth Post Black: standard compound designed for dry condition riding Red: semi-aggressive compound for good performance Salmon: aggressive compound for extreme weather conditions Dual: combination of Salmon and Black compounds for more controlled, smoother stopping

The Supra 2 is an updated design of the original Supra. This is one of Kool-Stop's most popular rim pads and offers a thicker friction material for longer life. Features: - Hardened and plated reinforced steel backbone - Patented angled tip plow - Water grooves - Knurl-lock washer system - Self tow in - Available only in Threaded - Rim Friendly Compounds Compounds: - Salmon - Kool-Stop's most famous Salmon compound is also one of our most aggressive compounds for extreme all weather conditions especially in the wet, but still superb in the dry. - Electric - Kool-Stop's E-Electric compound is formulated specifically for the higher speeds and weights of electric bicycles. - Clear - An extreme compound for only experienced trick or trails riders needing a compound that will instantly lock the wheels. - Ceramic - This compound was designed for ceramic coated rims and is great in all weather conditions. - Pink - Colored pads are a semi–aggressive compound that will give you good performance in all weather conditions. Specifications: - Weight per pair: 60.6 grams - Overall length: 66.5 mm - Pad contact width: 9.1 mm

- Thinline: Thinner, longer molded pads for extra clearance and easy adjustment - Red: semi-aggressive compound for good performance - Salmon: aggressive compound for extreme weather conditions - Dual: combination of Salmon and Black compounds for more controlled, smoother stopping

- High performance compounds recommended for all-conditions - Steel backing

Kool-Stop disc pads are made with organic materials that are blended and bound together using a resin. The compounds do include small amounts of metal to improve the braking formula but though this is a mined material the pads are largely organic. The term semi-metallic can also be used. Kool-Stop has found during testing that their disc pads are Rotor Friendly and provide high performance braking throughout the life of the pad. - Qty 1 = enough for 1 wheel

Kool-Stop's E-Bike disc pads are produced with a ceramic barrier between the organic friction material and the steel backing plate to reduce heat transfer into the brake caliper causing brake fade. With the heavier design and quick speeds of Electric bikes, they require a compound that will hold up and provide consistent braking power. - Qty 1 = enough for 1 wheel

- High performance compounds recommended for all-conditions - Steel backing

- High performance compounds recommended for all-conditions - Steel backing

Kool-Stop disc brake pads designed for use with Shimano disc brakes. - Features a copper plated backing plate and sintered pad compound for extreme conditions like down hill - Compatible with Shimano direct mount BR-RS505/805, Dura Ace BR-R9170, Ultegra BR-R8070/BR-R7070, GRX BR-RX810/BR-RX400, Metrea BR-U5000, XTR M9100, and Tiagra 4770

- For long tours these pads offer safety together with excellent performance in all situations. - For MT disc brake 2 piston - 2 single brake pads, 2 pad retaining bolts

Mavic's Exalith brake pads were specifically developed according to their Exalith rim technology to ensure the most consistent and predictable braking in any weather conditions. - Use only Exalith brake pads with Exalith rims. - Available in standard and CXR-specific for Campagnolo or Shimano brakes.

The Problem Solvers Double Barrel Brake Lever lets you operate 2 brakes with this one brake lever. It is made of light, durable aluminum with a steel clamp bolt and aluminum adjusting barrels.

- Includes a washer and 10,12,14,16,18,20,22 and 30mm backing nuts

Original equipment pads for no-compromise disc brake performance. - Steel backed organic pad is quiet - Each pad kit includes two pads, a pad spreader spring, guide pin and clip - For use with Level, Level TL, Level T, Level Ultimate, Level TLM (B1, 2020+), DB, Elixir, and 2-Piece Road

SRAM road disc brake pads are designed for use with SRAM road hydraulic disc brakes (HRD). - For use with Level Ultimate & Level TLM Brakes - Pad Material: Organic - Type: Road/CX - Includes guide pin, clip, & pad spreader

Original equipment pads for no-compromise disc brake performance. - Pad Shape Number: 37

SRAM's Disc Brake Pads are reliable and rugged. These pads are compatible with Avid Trail and SRAM Guide and G2 disc brakes.

SRAM's Apex Brake Caliper is forged from aluminum for low weight and high strength. SRAM's powerful dual-pivot design offers excellent stopping power and great modulation. You'll appreciate the easy-to-replace cartridge brake pads, and the handy quick release and adjustment barrel too.

SRAM's Rival 22 Front Brake Caliper delivers competition-ready speed control, low weight and lovely streamlined aesthetics that will enhance any road bike. Featuring a powerful dual-pivot design and cold-forged-aluminum construction, the Rival brake offers excellent stopping power. You'll appreciate the easy-to-replace cartridge brake pads, the handy quick-release, and adjustment barrel.

SRAM's Rival 22 Rear Brake Caliper delivers competition-ready speed control, low weight and lovely streamlined aesthetics that will enhance any road bike. Featuring a powerful dual-pivot design and cold-forged-aluminum construction, the Rival brake offers excellent stopping power. You'll appreciate the easy-to-replace cartridge brake pads, as well as the handy quick-release and adjustment barrel.

- A mountain bike specific rotor designed to improve brake performance while reducing noise and increasing heat dissipation - New brake track pattern for increased pad traction and recessed spokes with thermal dissipating paint - HS2 is more powerful, and quieter rotor with best-in-class heat management - Hub Compatibility: Center Lock - Disc Material: Steel

Stainless steel rotor designed for smooth and quiet braking with any disc brake caliper.

The CenterLine design provides a smooth, consistent, and quiet running braking surface. Rounded edges make for easier wheel installs and are UCI-compliant. - Compatible with both road and mountain bike brakes - Rounded edges are UCI-compliant and allow for easier wheel installs - Hub interface: CenterLock - Rotor Type: Centerline

Paceline disc brake rotors incorporate the elegant design of our eTap AXS road groupsets and feature a new brake track vent design for smooth, quiet braking performance. - Designed for road use - Paceline brake track offers quiet brake operation

SRAM's Centerline Rotor delivers consistent, quiet and powerful braking. The rotor has a consistent center of friction throughout rotation to minimize vibration, so the only thing you'll notice about your brakes is how well they perform.

Level T capitalizes on the same trail-taming brake technology that conquered the 2015 World Mountain Bike Championships, to deliver a powerful and consistent XC and trail-optimized brake set that keeps your capital in the bank. This budget-minded, MatchMaker-compatible brake set provides all the power of its siblings, keeping you in complete control.

The SRAM Level brake levels the playing field with power and reliability stuffed into a lightweight package. This is a no-nonsense performer, but don’t let its understated disposition fool you — Level gives you the art of braking in minimalist form. - Same proven lever technologies as Guide—piston, seals, reservoir and bladder - Compact lever body with DirectLink - Distinct contact point - Pinch clamp - Application (DB): Mountain Bike - Brake type: Hydraulic - Blade material: Aluminum - Stamped - Orientation: Right Rear - Pad type (Disc): Steel-backed organic - Bracket (Disc Brake): Direct mount DIR, Intl Std(140mm Rear,160mm Frt rotor) 0IS, Intl Std(160mm Rear,180mm Frt rotor) 20I - Hose length (mm): 1800mm, 950mm - Pistons: 2 - Piston material: Phenolic Plastic - Rotor type recommended: 1-piece G2 CleanSweep - Weight Based On: Direct Mount, 800mm hose, 160mm G2 Rotor (TARGET) - Weight (g): 430

Guide T brings consistent performance and reliable stopping power thanks to a revised lever design and lightweight four-piston caliper. Featuring SRAM's Directlink lever, updated master cylinder and timing port closure, all combined to provide a more positive braking system. - Bleeding Edge, drip-free bleed port closure and adaptor to minimize fluid loss - Heat Shield technology to reduce caliper fluid temperature and prevent loss of braking power - MatchMaker compatible for a clean and simplified look - Ambidextrous lever mount design - Lightweight 4-piston dual-diameter caliper - Includes steel-backed organic pads - Front includes 950mm hose - Rear includes 1800mm hose

The cores of brake performance are consistency, reliability, and trust. And, with G2 R, we focused on offering a premium value without compromising the heart of the operation. This brake gives riders the G2s famed "Mini-Code" power and a whole suite of SRAM standard features at an absolutely unbeatable value. - Power organic pads give riders both feel and bite - Engineered for easy installation and maintenance - Tools-free reach adjust for quick personalization

With its completely new, 4-piston S4 caliper, SwingLink lever cam, and carbon lever blade, SRAM's 360-gram Guide Ultimate stands alone as leader in its class. It has been engineered to be light and powerful, with superior heat management capabilities, which give you better, more consistent, more reliable braking. The new caliper design also incorporates a redesigned seal and aluminum piston interface for ease of setup and improved consistency, while Bleeding Edge technology makes bleeding the Guide Ultimate a quick and easy task.

Shimano Replacement pads for Mountain brake shoes - Shimano Cartridge-type mountain brake pads fit models: XTR BR-M970, BR-M960, BR-M951, BR-M950 XT BR-T780, BR-M770, BR-M760, BR-M750, BR-M739, BR-M737 LX BR-T670, BR-M580, BR-M570 Deore BR-M530, BR-M510 Alivio BR-M430, BR-MC18 Acera BR-M422, BR-M421, BR-M420, BR-M330, BR-T300 DXR BR-MX70 MX BR-M600 - M70CT4: Only for sidewall-machined rims; performs especially well in wet conditions and may pass DIN standard; tends to be low noise, low rim wear and fade - Color: Black - Intended Brake Type: Linear Pull - Pad Attachment Style: Threaded Post - Pad Type: Replacement Insert - Cartridge - Rim Compatibility: Standard

Shimano Replacement pads for Road brake shoes - Color: Black - Intended Brake Type: Caliper - Pad Attachment Style: Bolt-In (Caliper) - Pad Type: Replacement Insert - Cartridge - Rim Compatibility: Standard - Shimano Cartridge-type road brake pads fit models: Dura-Ace BR-9000, BR-9010, BR-7900, BR-7800, BR7700 Ultegra BR-6800, BR-6700, BR-6600, BR-6500 105 BR-5800, BR-5700, BR-5500 Non-Series BR-R600, BR-R561, BR-R560, BR-CX70s

• 107mm arch for better clearance with mud guard • Updated rubber boots secure attachment to lead pipe • Strong braking power with excellent braking control • Cartridge shoe holder • Color options: Black, Silver

Shimano Altus BR-CT91 cantilever brakes offer confident and reliable braking at a convenient price point. - Brake Lever Actuation: Short Pull - Brake Mount Type: Canti Studs - Material: Aluminum - Pad Attachment Style: Threaded Post - Weight: 204g

- Aluminum pad holder with R55C4 pads

Shimano M03 Metal Disc Brake Pads - OEM pad for XT BR-M755 caliper - Sintered Metal pad with consistent, high stopping power in wet or dry conditions and excellent durability