Tools

Park's Offset Brake Wrench utilizes a unique design that allows it to reach into tight areas that other wrenches cannot. The OBW-3 features a 14mm wrench on one end and the other end fits into a brake's tension springs to rotate the brake around its bolt for proper alignment. The OBW-4 features 10-, 11-, 12-, and 13-mm opening to fit most models of sidepull brakes.

- Blade chrome plated, black anodised tip - Handle – polypropylene

• Essential mechanic tool to properly service and maintain all RockShox products • For RockShox Monarch

Our 2437 open bore adapter is used to press 24x37 sealed bearings into bottom bracket cups, and direct fit frames like trek BB90. The adapter is machined with one step at 24mm ID, which fits into the center of the sealed bearing. - Installs: 24x37 bearing - Inner step outer diameter: 23. 8mm - Outer diameter: 36. 8mm - Thru hole diameter: 0. 387" (9. 8mm) - Inner hole sized to fit 1/2" threaded rod - Compatible with BP0006, BP0007 - Machined, red anodized aluminum - Sold individually (2 drifts required for some installations)

This 29mm open bore adapter is used to press 29mm x 42mm (DUB) sealed bearings. The adapter is machined with one step at 29mm OD, which fits into the center of the sealed bearing. For use with Wheels Mfg. bottom bracket press (PRESS-7 , PRESS-7-PRO or PRESS-9-PRO). - Inner step outer diameter: 28.9mm - Outer diameter: 41.8mm - Thru hole diameter: 12.8mm (1/2-inch) - Thickness: 7mm - Machined, red anodized aluminum - Sold individually

Our GXP-LEFT open bore adapter is used to press 22x37 sealed bearings into SRAM GXP bottom bracket cups and direct fit frames like trek BB90. The adapter is machined with one step at 22mm OD, which fits into the center of the sealed bearing. - Installs: 22x37 (GXP) bearing - Inner step outer diameter: 21. 9mm - Outer diameter: 36. 8mm - Thickness: 7mm - Thru hole diameter: 0. 387" (9. 8mm) - Inner hole sized to fit 1/2" ACME threaded rod - Compatible with BP0006, BP0007 - Machined, red anodized aluminum - Sold individually

Heat-treated alloy tool steel, one inch base fits wrench or bench vise. Thin-wall construction allows use without removal of cones and locknuts. The FR-5 has 12 splines that are approximately 23.4mm across. - Fits Shimano, SRAM, Sunrace, Suntour, Chris King and other cassette lockrings - Fits the SRAM XX1 11-speed cassettes - Also fits Shimano disc brake lockrings - Always use a quick-release skewer to hold the tool in place and snug to cogs when loosening; for solid axles, use the axle nut

A handy tool designed to make installation and removal of bicycle electronic shifting wires and batteries quick and easy. - Durable composite body is durable and prevents scratching of expensive components - Angled Shimano Di2 E-TUBE ends allow for both installation and removal in tight spaces - Universal coin cell tool helps remove and install battery covers on SRAM eTap

Park's Cone Wrenches are made of durable tool steel and are nice and thin to fit on the small-clearance cones found on hubs and other bearing assemblies. Plus, they work as regular wrenches, too. They feature Park's special Y heads that put more material where it's needed for excellent durability and strength. Most applications require at least 2 cone wrenches. If you have questions please contact us and we can recommend the correct sizes for your needs.

Park's Cone Wrenches are made of durable tool steel and are nice and thin to fit on the small-clearance cones found on hubs and other bearing assemblies. Plus, they work as regular wrenches, too. They feature Park's special Y heads that put more material where it's needed for excellent durability and strength. This 24mm wrench fits Shimano 15mm through-axle front hubs and many suspension-fork top caps. Some applications require at least 2 cone wrenches. If you have questions please contact us and we can recommend the correct sizes for your needs.

Park's Shop Cone Wrenches are made of durable tool steel and are thin to fit the low-clearance adjusting nuts and cone flats on hubs and other bearing assemblies. Park's special Y-heads put more material where it's needed for excellent durability and holding power. The 26mm size fits through-axle end caps and suspension fork crowns. Most applications require at least 2 cone wrenches. Call or stop by. We can recommend the correct sizes for your needs.

Fact—tools make work easier. Free up that extra hand during tire stud installation with the Bontrager Tire Stud Tool, featuring a magnetized tip that securely holds the tire stud in place for a quick and easy installation. So grab a beverage of your choice, add some studs to your studdable tires, and ride through the winter's worst. Key features - Magnetized tip securely holds tire stud for easy installation - Use with Bontrager Tire Studs for installation on stud-ready tires

Park's Bottom Bracket/Cassette Tool for Campagnolo is an indispensable tool for your Campagnolo drivetrain. It's for installing and removing all Record, Chorus, Centaur and Athena bottom brackets, and all Campagnolo cassette lockrings.

For use in conjunction with our reaming pedal taps, this thread insert is held in place with a strong thread locker and allows you to install any standard pedal. - Pack of 10, fits 9/16" pedals.

Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. The FR-5.2G has 12 splines that are approximately 23.4mm across. - Fits Shimano, SRAM, SunRace, SunTour, Chris King and other cassette lockrings - Fits the SRAM XX1 11-speed cassettes - Also Fits Shimano disc brake lockrings - Guide pin stabilizes tool

The Park FR-2 Freewheel Remover fits SunTour two-notch freewheels. It's built thin so that removing axle parts is unnecessary. And, it's constructed of durable heat-treated steel. (Not recommended for use with SunTour 4- and 6-notch freewheels.)

Park's Hex Wrench Set offers all the popular Allen wrenches (1.5, 2, 2.5, 3, 4, 5 and 6mm) in a convenient fold-up unit. The tool tips are chamfered for a positive grip and the one-piece fiber-reinforced-resin handle is light, comfortable, slip resistant and 40% stronger than steel.

The Magnetic Parts Bowl is the ideal solution for keeping track of small metal parts. It's 6 inches in diameter and featues an extra-strong magnet so bearings, cones and springs stay put and you don't lose them.

Choose the perfect tool for the job with Park's P-Handled Hex Wrenches. These top-shelf Allen wrenches come with offset handles made from durable nylon in a comfortable, ergonomic design. They are made of chrome vanadium for exceptional durability. The long shafts feature Bondhus heads for accessing hard-to-reach bolts and the short ends are chamfered for extra grip and high-torque applications.

Park's professional-quality, precision-sized spoke wrenches are hardened and chrome plated for long service. Wrenches are vinyl coated in one of four colors indicating the size at a glance. You will find these wrenches in virtually every professional bike shop and every shop mechanic's personal tool stash. Make sure you have the sizes you need in your home toolbox and bike bag.

This handy shop aid is ideal for sizing spokes, ball bearings, and crank cotters. To use, just hang the head of the spoke in the oblong hole and read its length on the scale. For crank cotters and ball bearings it works just like a gauge for drill bits. • Has both metric and fractional spoke length markings • Anodized aluminum with embossed markings to allow easy reading and long life

• Updated to fit better in the hand with a more rounded, smoother shape • The precision sized SW-7.2 fits the three most popular spoke nipple sizes on the market • Nickel plated for years of service • Designed for the home mechanic. FIts the following size spoke nipples: • .127" (3.23mm) • .130" (3.30mm) • .136" (3.45mm)

12 splines, 22.6mm diameter fits Shimano, Sachs Aris, Sun Race, DNP Epoch, and other 5–10 speed freewheels. The FR-1.3 includes an enlarged thru-hole to accommodate 14mm axles.

- Shimano, SRAM, Sun Tour, Chris King and Sun Race and others.

Works with the following forks: - Pike - Lyrik - SID - Revelation - Reba - Paragon This tool can also be used to remove and install SRAM/Shimano cassettes.

A must-have tool for any rider or mechanic who services hydraulic brakes. The PS-1 Pad Spreader features a tapered edge designed to drive apart and reset hydraulic bicycle brake pads that may have been accidentally engaged. The head of the PS-1 mimics a section of disc brake rotor, with strong stainless steel construction and a long, vinyl-dipped handle for leverage and comfort. The PS-1 can also be used as a temporary stand-in for the rotor when testing or servicing the hydraulic system, negating the need to repeatedly remove and install the wheel. - Thickness: 1.95 mm - Length: 162 mm (6.4")

Park's Pin Spanners are designed for maximum usefulness and versatility at the best value. Tough high-carbon tool steel is used to ensure long life and the handles are vinyl coated for a great grip and color-coded for easy identification. The green-handled SPA-1 is used to turn the adjustable bottom-bracket cup found on most 3-piece cranksets.

Park's Pin Spanners are designed for maximum usefulness and versatility at the best value. Tough high-carbon tool steel is used to ensure long life and the handles are vinyl coated for a great grip and color-coded for easy identification. The red-handled SPA-2 is for turning the bearing cones on most freewheels and the one-key-release rings on crankarms.

Having trouble getting at internal spoke nipples? Park's Square Socket Internal Nipple Spoke Wrench comes to your rescue. The extra-long socket fits recessed nipples on most deep-section aero wheels. And, the ergonomic handle is comfortable even after you've built wheels for the entire team.

Park's Valve Core Tool is great for tightening, removing and installing Schrader and Presta valve cores (the cores are inside the valve), and also Presta valve extenders that have 5mm wrench flats. It's a handy tool to save a tube when all that's wrong is a broken valve, and it also lets you remove valves to easily insert sealant.

Material: premium chrome vanadium steel

The Cyclone Chain Scrubber brushes are replaceable. The RBS-5 brush set includes the large side scrubbing brush, two roller brushes, and two wicking foam blocks.

The BBT-4 is made for the installation and removal of 6-notch SC-S and AC-H cartridge cups used on sealed cartridge bottom brackets. These bottom brackets have six notches around the outside of each cup. The handle of the BBT-4 is vinyl coated for comfort. The major diameter of the tool is nominally 44mm, and the minor diameter 38mm. The BBT-4 is compatible with the following sealed cartridge bottom brackets: • Campagnolo Veloce • Xenon • Mirage • Daytona • Avanti

Park Tool's SW-11 is a forged, double-ended spoke wrench designed to fit select Campagnolo wheels. Precision machined, plated and vinyl dipped for comfort and long life. It fits Campagnolo 5.5mm and 6.0mm hex spoke nipples.

A purpose-built wrench designed for compression nuts, nipples, and other fittings found on hydraulic brake systems. The five-sided flare wrench head evenly spreads out the force being applied to the wrench, reducing the risk of damage to fasteners and brake hoses. Features a slim, low-profile design to access low-clearance fittings found on hydraulic levers and calipers. Built-in 3/8" fittings allow for use with a torque wrench to achieve proper torque. - Double-sided wrench features 7mm and 8mm wrench openings - Dimensions: 4" x 0.75" x 0.15" (101mm x 19.5mm x 4.5mm) - Weight: 44g (1.55 oz.) NOTE: When using with a torque wrench, the MWF-3 should be installed at a 90° angle from the beam of the wrench.

World-famous Park Tool quality wrapped up in a combination metric wrench. Features both open and 12-point two-way ratcheting box ends. Forged from chrome vanadium steel, chrome plated, meticulously polished, then center dipped in Park Tool blue vinyl for a positive grip. Strong, comfortable, and beautiful!

Park's Spoke Wrench For Shimano Wheel Systems is the right tool for the job. It's made of durable tool steel and features 4.4mm and 3.75mm openings to fit all Shimano Wheel System nipples located at the hub and at the rim. It's vinyl-coated for a great grip, too.

Three of the most common Torx compatible wrench sizes in our classic 3-way design. The TWS-3 is useful for disc rotor bolts (T25), chainring bolts (T30), and hydraulic brake work (T10). TWS-3 FEATURES - T10, T25 and T30 Torx compatible set - Wrenches made from industrial tool steel, through hardened and tempered for long life

Regular chain and component cleaning is a chore no more thanks to Finish Line's Grunge Brush. The "horseshoe" end scrubs the chain thoroughly with its compact bristles and the long bristled end provides easy cleaning of sprockets, chainrings, pedals and derailleurs. Plus, the Grunge Brush is portable enough to bring to races and weekend cycling excursions too.

Park Tool introduced the bicycle world to the 3-way hex wrench set over 30 years ago. Our 3-way wrenches fit perfectly in the palm of the hand and provide excellent leverage, making them a favorite of countless shop mechanics worldwide. AWS-3 FEATURES - 2mm, 2.5mm, and 3mm hex set - Wrenches made from industrial tool steel, through hardened and tempered for long life - Chamfered tips for a perfect fit

- Xtreme chain lube is formulated for long-distance and extreme off-road conditions - MFR bonds to metal surfaces and resists build-Up and tackiness, in addition to shedding water

- Used when facing BB86/92 bottom bracket shells and reaming is not required - Used in conjunction with HTR-1 head tube reaming and facing set (PK-6710), 750.2 centering cone adapter (PK-6735) and 690-XL facing cutter (PK-6730)

Ideal for wheel truing when there’s limited access to spoke nipples such as small, high spoke count wheels or while using an anti-rotation spoke holder. The SW-9 combines two common spoke nipple sizes, 0.127-inch/3.23mm (SW-0) and 0.136-inch/3.45mm (SW-2). Forged, machined, heat-treated, plated and vinyl-dipped for years of dependable use.

The Finish Line Absorb-It Mat is the perfect way to keep any work area clean. Designed with special absorption fiber technology, the Absorb-It Mat absorbs and traps chain lubricants, cleaners, degreasers, brake fluid and hydraulic oils. The combination of absorption fibers and a leak-proof poly liner make the Absorb-It Mat perfect accessory when degreasing & lubricating bicycle chains. Use the Absorb-It on a work bench, under an automobile to catch leaking fluids, in a car trunk to prevent stains, in a chemical storage cabinets, or under a trainer to catch perspiration. The Absorb-It Mat comes in two different sizes: Small (48" X 18") and Large (60" X 36"). The 48" x 18" will absorb and trap up to 11L of fluids. The larger 60" x 36" will absorb and trap up to 2.5L of fluid. Both mats can be cut with a scissor to fit in custom areas.

Because even your super-fast Mavic wheels will eventually need truing, Park designed the Spoke Wrench For Mavic Wheel Systems. This comfortable, vinyl dipped, two-sided spoke wrench is designed to easily access Mavic fittings. Plus, it fits both Mavic 9mm threaded eyelets and 5.65mm integrated nipples.

Park Tool introduced the bicycle world to the 3-way hex wrench set over 30 years ago. Our 3-way wrenches fit perfectly in the palm of the hand and provide excellent leverage, making them a favorite of countless shop mechanics worldwide. AWS-1 FEATURES - 4mm, 5mm, and 6mm hex set - Wrenches made from industrial tool steel, through hardened and tempered for long life - Chamfered tips for a perfect fit

Specially designed for crank bolts, freehub removals and pedal installs and removals, Park's Hex Tools are built for speed, leverage and comfort. Their super-precise hex heads and dual-density, ergonomic handle mean the HTs may soon become your new favorite tools.

Because even your reliable Mavic wheels will eventually need truing, Park offers their Spoke Wrench For Mavic Wheel Systems. This comfortable, vinyl-coated, double-ended spoke wrench easily accesses and turns Mavic nipples. One end fits Mavic 6-spline, 9mm threaded eyelets and the other fits their 7-spline, 6.4mm nipples.

Everything you need Be prepared for roadside adjustments and minor repairs with the Bontrager Comp Multi-Tool. This simple tool features a compact design that easily packs away yet provides all of the essential tools to keep your bike tuned and running smoothly. Key features - 2,2.5,3,4,5,6,and 8 hex along with Phillips, flat and T25 - Alloy sides for a sleek lightweight design - Material: Steel

The ultimate trailside companion. This high-tensile steel multi-tool features a precise fit and finish and side grips for a secure handhold even with gloves on. The M5 includes: Hex wrenches: #3, 4, 5, 6 Screwdrivers: Phillips #2 Length: 89mm Weight: 85g Warranty: Lifetime

The Park Tool FR-5.2GT is designed specifically for use when removing and installing cassette lockrings from thru axle hubs. -Utilizes a 12mm guide pin to stabilize the tool during use - Fits 12-spline cassette lockrings from Shimano, SRAM (including 1x), SunRace, SunTour, Chris King and others (23.5mm diameter) - Fits some Shimano and similar disc brake rotor lockrings

Three most popular TORX sizes: T10, T15 and T25mm

- Handy tool to have to easily remove your KMC MissingLink. - Easy to handle! - Very comfortable!

Smart Design - Interlock the levers to create a MissingLink opener. Remove single to 12-speed MissingLinks with ease. Ergonomic - Accurate and comfortable design allows you to quickly insert the opener into the chain for MissingLink removal. Durable Flexibility - Made using Swiss polymers specially formulated for the perfect balance of rigidity and flexibility. Semi-gloss finish helps prevent scratches on your bike. Multi-Functional - Separated, the MissingLink Opener becomes easy-to-use tire levers and a deflating tool. Super-Portable - Stackable. Saves space.

Problem Solvers 90 degree Presta valve inflator is used to inflate disc wheels, thanks to its narrow, low-profile head. • Presta valve • 90 degree inflator works with most pump heads

Park's Compact Crank Puller is used to remove Shimano Octalink, ISIS Drive and square-taper cranksets. It includes 2 rotating tips (16.3 and 11.3mm) to make the job easy. This is a great tool for your travel and home tool kit.

Now you can easily tackle any crank bolt with Park's Crank Wrench. It features a dual-sided head with a 14mm socket and 8mm Allen wrench on a long, vinyl-coated handle so you're sure to have the leverage necessary for the job.

Park's AWS-7 features a Y-shaped nylon handle with 4 and 5mm Allen wrenches and a T25 Torx wrench. This convenient 3-in-1 tool keeps commonly used wrenches together and offers an excellent grip as well.

The BBT-16 removes and installs the self-extracting/one-key release caps on SRAM and RaceFace cranks with a 16mm hex hole. Features investment cast steel construction and an option to use 8mm hex for better leverage.

Professional quality T-Handle star-shaped wrench built for speed, efficiency, leverage and a perfect fit. - Carefully selected combination of Chrome Vanadium and S-2 tool steels - Unique anodized aluminum Speed Spinner makes running long bolts in and out quick and effortless - Sliding T-handle creates increased leverage and multiple access positions