Filter By:
- Lubes/Cleaners (72)
- Tools (334)
- Workstands (27)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Tools/Maintenance

$14.99
The ultimate trailside companion. This high-tensile steel multi-tool features a precise fit and finish and side grips for a secure handhold even with gloves on. The M5 includes:
Hex wrenches: #3, 4, 5, 6
Screwdrivers: Phillips #2
Length: 89mm
Weight: 85g
Warranty: Lifetime

$14.99
The Park Tool FR-5.2GT is designed specifically for use when removing and installing cassette lockrings from thru axle hubs.
-Utilizes a 12mm guide pin to stabilize the tool during use
- Fits 12-spline cassette lockrings from Shimano, SRAM (including 1x), SunRace, SunTour, Chris King and others (23.5mm diameter)
- Fits some Shimano and similar disc brake rotor lockrings

$46.95
The PCS-EXT is an extension that adds up to 21 inches (53 cm) of adjustable working height to any PCS-1 or PCS-4 repair stand manufactured between June 1996 and December 2001. The kit includes a quick-release collar and extension tube to raise the working height of the stand. The PCS-EXT is required for use of the 106-AC Accessory Collar.

$267.95
Park Tool's 130 Repair Stand Base is designed for the PRS-3, PRS-3OSLB, PRS-3 OS-1, PRS-3 OS-2 and the PRS-23 LB Repair Stands (each sold separately).
• 22-1/2" x 22-1/2" x 7/16" (57cm x 57cm by 1.1cm) steel plate
• Approximately 68 lbs (31k)
• Black painted

$105.00
Product details
- A professional-grade tool developed in partnership with Knipex and made to last
- 7.5"/190mm length provides high leverage with minimum effort
- Made from heavy-duty steel and additional induction hardening for tough, continuous use
- Made in Germany
- Features an integrated class-leading crimper for cable end caps and housing ferrules

$72.99
Shop-quality, adjustable torque driver that limits torque applied to fasteners, preventing over-tightening and damage to lightweight components. The ATD-1.2 features all-metal internal construction with a comfortable, ergonomic composite molded grip. Each tool is assembled and calibrated at Park Tool's factory in Minnesota.

$9.50
Our GXP-LEFT open bore adapter is used to press 22x37 sealed bearings into SRAM GXP bottom bracket cups and direct fit frames like trek BB90. The adapter is machined with one step at 22mm OD, which fits into the center of the sealed bearing.
- Installs: 22x37 (GXP) bearing
- Inner step outer diameter: 21. 9mm
- Outer diameter: 36. 8mm
- Thickness: 7mm
- Thru hole diameter: 0. 387" (9. 8mm)
- Inner hole sized to fit 1/2" ACME threaded rod
- Compatible with BP0006, BP0007
- Machined, red anodized aluminum
- Sold individually

$46.50 - $64.45
Pro X Bio-Bike Cleaner Concentrate is powerful but at the same time safe on all parts of a bicycle. 100% Bio-Degradable. Non-toxic. Water Soluble. Eco Kind. Low Scent.
Rinses Clean. Leaves no residue. No water spots. Long-lasting performer and efficient in bicycle ultrasonic and aqueous parts cleaners (heated or cold).
USES: Refilling spray bottles. Our in-line hose Mixing Unit. Bucket. Small parts cleaning containers. Chain cleaning machines. Using a hose end sprayer or pressure washer, you will experience sudsy, not foamy. Ultrasonic bicycle parts cleaners. Aqueous bicycle parts cleaning tanks (cold or hot).
Highlights:
- Efficient. Performance-based
- 100% Biodegradable
- Non-Toxic
- Safe on all parts of a bicycle
- Water Soluble
- Use in Ultra Sonic parts cleaners
- Use in Aqueous parts cleaner
- Leaves no residue or water spots

$22.99
- These 12" blades are compatible with the Unior hacksaw frame and come in a pack of 2
- Much safer for cutting carbon as it leads to fewer loose strands and leaves a cleaner result

$44.99
- Hex wrenches 2, 2.5, 3, 4, 5, 6, 8
- TX wrenches 10, 25
- PH1 screwdriver
- Chain tool
- Schrader & Presta valve tool

$28.95
A precision CNC-machined aluminum tool for the installation and removal of select threaded bottom brackets with 12-notch tool fittings, including SRAM BSA DUB, Race Face Cinch, Rotor BSA30, and others. Manufactured in-house by Park Tool, anodized for easy identification and featuring a ratchet/torque wrench-compatible 3/8" drive.
The BBT-79.3 features integrated threads for full compatibility with the Park Tool BBT-RS Bottom Bracket Tool Retaining System (sold separately). The BBT-RS uses an adjustable spring-based tension system to apply consistent, adjustable pressure to the tool, ensuring full engagement with the tool fitting and preventing slippage.
Fits 12-notch threaded bottom bracket tool fittings with a major diameter (outside of notches) of 45–47 mm and a minor diameter (inside of notches) of 44 mm, including:
- SRAM BSA DUB
- Race Face Cinch
- Rotor BSA30
- Zipp Vuma
- Hawk Racing BB3086
- and more
- 3/8" drive fitting

$229.99
- Crank Saver—Pedal thread repair and insert kit
- Includes: left and right reaming tap 5/8x24 TPI, 10 pedal thread inserts for left crank arm, 10 pedal thread inserts for right crank arm, metal box with cut out SOS foam trays.

$25.95
A precision CNC-machined aluminum tool for the installation and removal of select threaded bottom brackets with 12-notch tool fittings, including Praxis Works® M30 bottom brackets. Manufactured in-house by Park Tool, anodized for easy identification and featuring a ratchet/torque wrench-compatible 3/8" drive.
Fits 12-notch bottom bracket tool fittings with a major diameter of 48–50 mm and a minor diameter of 46.3 mm, including:
- Praxis Works® M30

$72.95
"Take the guesswork out of internal routing. The IR-1.3 speeds the installation of internally-routed cable, housing, electronic wiring and hydraulic hose into carbon fiber, titanium, and aluminum frames. The straightforward guide magnet system utilizes five long guide cables with unique fittings, which can be routed through the frame in a number of ways using the included guide magnet. Everything is neatly stored in a convenient compact case. A true time and frustration saver!??Includes five 188 cm (74"") guide cables with attached magnets and unique fittings:
• Barbed adapter — Threads into the end of brake & shift cable housing as well as hydraulic brake hose
• Rubber adapter — Securely holds electronic shifting wire such as Shimano® Di2, SRAM® RED® eTAP®, FSA® K-Force® WE®, and Campagnolo® EPS
• Di2®-specific adapter — Specially-designed connector clips into the end of Shimano® E-tube® Di2® shift wire, and is perfectly sized to fit into frame holes as small as 6 mm
• Di2® EW-SD300-specific adapter — Specially-designed connector clips into the end of Shimano® E-tube® Di2® EW-SD300 shift wire
• Reverse-polarity magnet — Used in conjunction with any of the other guide cables - feeds into the opposite end and meets the leading cable in the middle, aiding in routing on frames with tricky interior shapes
Also included:
• Double-threaded barb — Securely attaches new housing or hydraulic hose to existing housing or hose, allowing for easy replacement without redoing the routing
• Guide magnet — routes guide cables through the frame from the outside"

$33.87
The BK-UK includes six new and revised parts for the Park Tool BKD-1 and BKM-1 Hydraulic Brake Bleed Kits, allowing for compatibility with the latest brake models from popular manufacturers.
Includes:
- Part #2600A (x2) — M4 x 0.8 adaptor for use with SRAM DB8, Trick Stuff, and Campagnolo mineral oil brake systems
- Part #2588.2 — Thin-walled hose compression sleeve for internal bleed nipples, such as those found on Shimano mineral oil brake systems
- Part #2574A — Hose assembly with integrated fitting for bleed nipples such as those found on Shimano mineral oil brake systems
- Part #2615-2 (x2) — 11 mm bleed blocks for use with Hayes DOT brake systems
All parts also available individually.
NOTE: The seals on each part are designed for one type of fluid — DOT fluid or mineral oil — and should be used only on the systems they were intended for. DOT fluid and mineral oil should never be mixed in the brake system or in their respective service tools. Cross-contamination of brake fluid may cause seal failure which may result in brake failure.

$84.99
- Accuracy: 0.02mm/0.001"
- Measuring speed:1.5m/sec
- Made according to standard DIN 862
- Dual scale in inch and mm

$45.95
- Brake holder features M5, M6 & passthrough holes for attaching all disc brake mounting styles as well as most rim brake caliper styles
- 1-1/8" steerer tube features star nut for retaining top cap and spacers
- 2" flared cone for compatibility with tapered steerer tubes
- Compatible with 1-1/8" threadless stems only—not compatible with threaded headset/quill stem setups

$22.95
Park Truing Stand parts to get truing stands back into tip-top working condition.
The TS-2TA.3 installs quickly and easily into Park Tool Professional Truing Stands — including the TS-2.2 & TS-2 — for full compatibility with thru axle hubs.

$429.95
The PRS-26 incorporates proven features from our other Team Issue stands to produce a strong, lightweight repair stand that's at home on-the-go or in the race pits. The sturdy tripod leg design folds and unfolds quickly and easily, and provides stability on any surface. The clamp is height-adjustable from 97 to 147 cm (38" to 58"), and can be positioned over one leg or between two legs to accommodate any bike.
Precisely constructed from anodized 6063 T6 lightweight aluminum and durable composites, the PRS-26 is our lightest full-featured repair stand, and folds compactly for storage or transport.
The PRS-26 is equipped with the time-tested 100-25D Micro-Adjust Clamp, the same design featured on our shop repair stands. The 100-25D features narrow clamping jaws to fit into tight areas or on short seat posts, and clamps nearly any tube from 23 to 76 mm (7/8" to 3"), including aero tubes and dropper posts. The cam-actuated adjustment system allows for quick entry, adjustment and exit.
- Maximum weight capacity*: 36 kg (80 lbs.)
- Clamp capacity: round and aero tubes from 22 to 76 mm (7/8" to 3") wide
- Jaw width: 70 mm (2.75")
- Height adjustable from 97 to 147 cm (38" to 58")
- Base when open forms a triangle of 126 x 126 x 126 cm (49.6" x 49.6" x 49.6")
- Weight: 5.7 kg (12.6 lbs.)
- The PRS-26 uses the 100-25D Micro-Adjust Clamp
- Replaceable jaw covers (part #1960)
*NOTE: The maximum weight capacity of the PRS-26 assumes the bike's center of gravity is positioned directly below the clamp.

$74.00
Standard bleed kit for mineral oil brakes
- Includes 2 syringes/2 M4 fittings, bleed block, Torx tool, crowfoot
- SRAM Model ID: DB-SPP-A0

$9.99
Genuine Replacement Parts
Get your bike back on the trail with the brake parts you need.
Genuine Tektro replacement brake parts.
- Tektro specific mineral oil
- Only for use on Tektro brakes

$63.00
Standard bleed kit for mineral oil brakes
- Includes 2 syringes/2 M4 fittings, bleed block, Torx tool, crowfoot
- SRAM Model ID: DB-SPP-A0

$18.00 - $21.00
• Service kits include air can seals and wiper
• Available for RockShox air rear shocks--Ario, Monarch, Monarch RT3, DebonAir and Monarch Plus

$307.95
The Deluxe Wall-Mount Repair Stand easily mounts to any post or wall stud. This shop-quality stand places the bike approximately 14.5 inches from the wall, so you'll have plenty of work space. The awesome clamp is Park's Adjustable Linkage model, which feature's replaceable rubber jaws; fits seatposts and frame tubes from 1 to 1 5/8-inch diameter; includes recesses for cable housing and rotates 360 degrees for optimum bike positioning. This great stand lets you work on your bikes just like a pro and is built to last.

$145.02
Park Tool has long provided some of the best cutting and machining tools in the bicycle industry. Their 690 Cutting Facers reflect their commitment to maintaining this high level of quality. Please read below for use and compatibility information specific to each size cutter:
- 45mm (690): The 690 cutting facer is used on the HTR-1, HTR-1B, BFS-1, and BTS-1 cutting and facing tools. The facer has an outside diameter of approximately 45mm.
- 57mm (690XL): The 690-XL is a larger version of the 690 facer for the HTR-1 Head Tube Reamer and Facer. It has a nominal outside diameter of 57mm. It may be used in conjunction with the 788 reamer. It is also used with the 767 Pilot or the 768 Pilot to face only the large diameter headtubes used with, "low profile," ZS-type headsets.
- 65mm (690-XXL): The 690-XXL faces large headtubes. It has a nominal outside diameter of 65mm. Use the 690-XXL facer with the 750.2 Centering Cone Adaptor and 789 Reamer or 790 Pilot when facing head tubes with internal diameters of 55.95–55.90mm.

$54.95
The Park Tool SBS-1.2 is a shop-quality set of sockets, hex bits, and Torx style bits, selected specifically for common bike repair needs. Ideal for use with Park Tool torque wrenches, the SBS-1.2 3/8" drive bits and sockets are made from tough, chrome vanadium steel for lasting durability.