Filter By:
Parts & Accessories

$118.00
Be it the fireworks of a finale, an ideal rhythm, climbing on the top, or a deep, dark place extracting the last kilojoule of effort on your bike split, you want to adjust your gear with the twitch of a finger. eTap Blip satellite shifters allow you to shift when you want, where you want.
- Limitless remote shifting positions for drop and aero bars
- Wired shift buttons can be positioned however the rider prefers
- Connect to Blip Box or drop bar eTap levers
- Compatible with SRAM RED eTap shift/brake controls

$39.99
The Wahoo RPM speed sensor is the sleek, magnet-less solution for capturing cycling speed data. It easily mounts to your bike's front wheel hub, and the Bluetooth Smart and ANT+ dual band technology allow you to connect to and display data on both smartphones and bike computers. Tracking speed data has never been this easy.
- Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers.
- No tangled wires on your bike to connect the sensor to your device.
- The RPM speed installs easily with no magnets required
- It only weighs 16.5 grams with the mount included
- Provides accurate speed data during your ride
- Mounts on most front wheel hub with a secure silicone casing
- Two LED lights show the sensor's device connection (blue) and speed detection (red)
- No charging required! Operates on a coin cell battery for up to 1 years.
- RPM Speed will fit with most bikes and frame sizes

$49.00
SRAM eTap batteries are literally a snap to remove and charge. Just flip the tool-free battery latch up and slide the battery up and out of the derailleur. Then snap the battery into the USB powered charger and connect the charger to any USB power source or A/C USB adaptor. A full charge takes just 45 minutes to complete.
- Finish: Black
- Compatibility: SRAM RED eTap

$74.99
Get more data from your rides with the Bontrager Interchange digital combo speed and cadence sensor. This ANT+ 2.4 Ghz is designed to work with Bontrager Node wireless computers. It also works with many other ANT+ enabled devices. Sensor adjustment is easy with the adjustable arm.
• ANT+ 2.4 Ghz and Bluetooth Smart wireless digital speed and cadence sensor
• ANT+ and Bluetooth Smart allow simultaneous use of Trip 300 and smartphone
• For use with many ANT+ and Bluetooth Smart wireless technology enabled devices
• Independently adjustable arm for precise alignment of speed and cadence sensors
• Includes Bontrager wheel magnet and crank cadence band
• Includes silicone mounting strap to fit most chainstays and CR2032 battery
• Visit www.thisisant.com/directory/ for compatible ANT+ devices
• Visit www.bluetooth.com/pages/bluetooth-smart-devices.aspx for compatible Bluetooth devices

$40.00
Monitor your pedaling cadence as you ride with this easy-to-install wireless sensor. With no magnets or other exposed parts to line up, this sensor is easy to install, maintain and move between bikes.
Simply attach the sensor and ride. With no magnets or other exposed parts to line up, this sensor is easy to install, maintain and move between bikes.

$5.99
The MSW Computer Spoke Magnet is designed to fit round and bladed spokes of various diameters.
- Tool-free installation
- Alloy construction
- Fits round and bladed spokes

$26.99
Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr SRM Mount for a clean, flush look that places your SRM Head Unit exactly where you want it.
Key features:
- Blendr is an elegant, integrated accessory mounting solution
- Provides clean and secure mount for SRM head unit
- Works with any Blendr-compatible stem and the accompanying base
- For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)

$17.00
- Use to keep Blips in place on handlebars
- Fits 31.8mm round portion of drop bar
- Clamp mounts directly to bar outside of tape zone
- Ideal for use with thumbs or index fingers while hands are on the tops
- Right and left specific, just like Blips
- Weight: 12 grams (for pair)
- Material: Polypropylene
- Compatibility: 11-speed
- Recommended Group: SRAM RED eTap

$13.00
Profile Design's UCM XL Universal Computer Mount provides a convenient 60mm-long place to mount your computer on your aero bars. It installs without tools, stays put and can be positioned as needed for easily viewing and controlling your computer.

$5.99
Replacement plastic insert kit for K-EDGE Wahoo Mounts.
The co-polymer insert for Wahoo 1/4-turn style computers is a replaceable item. While it is extremely strong, it is designed to fail on a significant impact before the tabs on the back of the Wahoo break.
Attributes (specs):
– Qty 1 – K-EDGE Co-polymer Insert for Wahoo 1/4 Computer (Part No. K13-1604)
– Qty 2 – M3 x 0.5mm x 6mm with Pre-Applied Nylon 180,18-8 S.S. Screws

$39.99
Be ready for any terrain with this Garmin Edge mountain bike mount designed specifically for bikes with short stems. It’s ideal for off-road riding when you may not want your Edge bike computer mounted in front of your handlebar.

$49.99
Use these cables to connect your power mount to a compatible bike system. Choose the appropriate cable by selecting your version:
- Bosch eBike system Generation 2
- SHIMANO STEPS ebike systems with light connection terminals, and
- Power sources that use an USB-A port

$6.00
The K-EDGE co-polymer insert for Garmin 1/4 Turn style computers is a replaceable item. While it is extremely strong, we designed this insert to fail on a significant impact before the tabs on the back of the Garmin break.
- Qty 1 – K-EDGE Co-polymer Insert for Garmin 1/4 Computer (Part No. K13-503)
- Qty 2 – M3 x 0.5mm x 6mm with Pre-Applied Nylon 180,18-8 S.S. Screws

$67.99
The strongest K-EDGE Mount yet, designed for today’s heaviest computers, cameras and lights. Upgrade to the Garmin Max Combo mount for a solid and clean platform for your cycling electronics. Chosen by the best, year after year, when quality, performance and craftsmanship matter.
- Max XL combo mount is compatible with all Garmin Cycling Computers
- Combo Mount (Computer on top – light or camera underneath) with GoPro style light/camera interface
- GARMIN approved replaceable computer insert protects computer tabs
- CNC Machined Aluminum, Anodized Black with laser etched logos
- Made in-house, Boise, Idaho USA with a Lifetime Warranty
- Weight: 63g

$9.99
Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Trip Computer Mount for a clean, flush look that securely holds your Bontrager Trip computer in a perfect position to see on the go.
Key features:
- Blendr is an elegant, integrated accessory mounting solution
- Provides clean and secure mount for Bontrager Insta-Mount or Trip Computer
- Works with any Blendr-compatible stem and the accompanying base
- For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)

$74.99
Connect ANT+ and Bluetooth Smart devices to all of the data available from the DuoTrap S sensor for your on-the-bike wireless needs.
• ANT+ 2.4 GHz and Bluetooth Smart wireless digital speed and cadence sensor
• ANT+ and Bluetooth Smart allow simultaneous use of Trip 300 and smartphone
• For use with many ANT+ and Bluetooth Smart wireless technology enabled devices
• Includes Bontrager wheel magnet, crank cadence band, and CR2032 battery
• Works with Trek DuoTrap compatible bikes

$5.99
- Quick Charge USB-to-Micro-USB cable to charge your rechargeable Bontrager lights
- Also able to charge most other Micro USB systems
- 9 inches/23cm long

$184.99
The new DN300 Built-In type battery features the same waterproof design that Di2 users have loved for generations. Now with 3 ports, it delivers stable power to Shimano's 12-speed road derailleurs (and shifters if a fully wired option is selected).
- Compatible with thinner next-generation electric wire SD300 and systems after R9250/R8150 series
- Li-Ion type
- Capacity: 500 mAH |3.7Wh (± 2000km autonomy)
- Rated voltage: 7.4V
- Charges through RD-R9250 |RD-R8150 rear derailleur using EW-EC300 Di2 Charging Cable (sold separately)
- Fixing small parts included
- Weight: 52g

$33.99
K-EDGE’s legendary CNC machined aluminum quality and strength for the price conscious cyclist. Pro positioning of your computer, out-front and flush with the top of the handlebar.
- CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface
- Compatible: Garmin EDGE 820, 520, 510, 500, 25 and 20.
- Replaceable Garmin Insert with K-EDGE “Definitive Click” locking system
- Fits 31.8MM Handlebars
- NOT combo compatible
- Weight: 48g
- Anodized Color- Black

$59.99
SRAM eTap Battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs.
- Up to 1000 kilometers of riding per charge
- Weight: 24g
- Finish: Black
- Compatibility: SRAM RED eTap

$14.99 - $19.99
Blendr add-on to Kovee Pro 35 stems
Clean up your Bontrager Kovee Pro 35 stem cockpit with Blendr Pro bases.
- Blendr works with this simple formula: Stem + Base + Mount. Add accessory
- Bases for use with the Kovee Pro 35mm stem
- Add any accessory mount (sold separately) for an elegant, integrated look

$6.50
Keep your computer and sensors ready for every ride with replacement batteries
Key features:
- CR2032 battery is used for most Trek and Bontrager computers
- 23AE battery is used for the Bontrager Interchange Analog Wireless Sensor
- LR44 and L1154 batteries are identical and used in Bontrager SpeedTrap Sensor

$69.99
All you need for cycling data, all together at once! The Wahoo RPM Speed and Cadence sensors are both a sleek, wireless, and magnet-less solution. Each mounts easily to your bike and the Bluetooth Smart and ANT+ duel band technology allows you to connect and display data on both smartphone and bike computers.
- Dimensions (LxWxH): 1.25" x.75" x 1"
- Weight: 7 grams (without mount)
- Battery: CR2032
- Battery Life: Up to 12 months
- Water Rating: IPX7 (waterproof up to 5 ft)
- Wireless Signal Strength: Up to 10 feet
- Note: Speed Sensor is NOT compatible with spin bikes

$67.99
The strongest K-EDGE Mount yet, designed for today’s heaviest computers, cameras and lights. Upgrade to the Garmin Max Combo mount for a solid and clean platform for your cycling electronics. Chosen by the best, year after year, when quality, performance and craftsmanship matter.
- Max combo mount is compatible with GARMIN Cycling Computers smaller than EDGE 1000, 1030 style (example EDGE 820)
- Combo Mount (Computer on top – light or camera underneath) with GoPro style light/camera interface
- GARMIN approved replaceable computer insert protects computer tabs
- CNC Machined Aluminum, Anodized Black with laser etched logos
- Made in-house, Boise, Idaho USA with a Lifetime Warranty
- Weight: 60g

$28.99
The K-EDGE Gravity Cap is a great computer mount option for those riders that already a lot going on with the cockpit of their bikes, or just want a simple and sleek computer mount. The Gravity Cap replaces your existing top cap and is ideal for Downhill, Enduro, Gravel, Touring, etc.
- CNC Machined 6061-T6 Aluminum
- Injection Molded Copolymer Interface
- Compatibility: Wahoo ELEMNT
- Lifetime Warranty
- Weight: 18g
- Anodized Colors: Black

$49.99
Garmin's ANT+ USB stick plugs into your computer's USB port to wirelessly transmit your activities to Garmin Connect and Garmin's Training Center. It automatically receives your activity data when your compatible ANT+ Garmin device is within range.

$59.99
Superlight, machined aluminum, race mount for the ultimate Tour de France level performance. At 32 Grams the Race Mount is 33% lighter than the “standard” Garmin Mount.
- CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface
- Compatibility: Garmin 820, 520, 510, 500, 25, 20
- Fits Handlebars: 31.8MM
- NOT GoPro Compatible
- Anodized Color: Black, Red, Blue, Red/Blue
- Made in Boise, Idaho, USA
- Lifetime Guarantee against material or manufacturer defects. Damages due to abuse or crashing excluded.
* Attention: ASSEMBLY BOLTS NOT MEANT TO BE REMOVED OR TAMPERED WITH AT ANY TIME.
The torx head bolts are installed using a permanent thread-lock compound. Doing so will void all warranties.
Please contact K-EDGE warranty manager Info@K-EDGE.com for questions or concerns. We highly suggest you follow the recommendations in the Sigma instructions that recommend use of the provided tether leash.

$43.99
A simple, lightweight and versatile mount for positioning the Wahoo ELEMNT between the aero bars. Single bolt clamp and pivoting mount design.
- For 22.2mm diameter aero bar extensions
- Compatible with Wahoo ELEMNT, Wahoo Bolt, Wahoo MINI
- Combo Compatible with use of adapter for GoPro style interface action camera and lights
- Replaceable Wahoo insert
- Weight: 29g
- Anodized Colors: Black
- Made in Boise, Idaho, USA
- Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded